IK Multimedia iLoud MTM Manual Del Usuario página 23

English
Troubleshooting
I have connected my device to iLoud MTM but no sound comes out.
Make sure to set up the volume with the volume control on iLoud MTM and/or with your device's volume
control.
Sound is distorted.
When noticeable distortion occurs, please turn down the level of the speakers, or of the connected audio
source.
Calibration ended unsuccessfully (front LED blinks red)
If the calibration ends unsuccessfully and the front LED blinks red, make sure you have correctly inserted the
XLR cable both on the microphone and on the 1/8" ARC mic input on the rear of iLoud MTM.
22