LED-Accu Folding Lamp 6+1
ENG
Rechargeable LED-Working Light
Safety Notes:
Do not use this light in the vicinity of inflammable material or gases.
Make sure that the light source is not covered during use.
Only recharge the rechargeable workshop light with accessories delivered with the product.
Keep this light away from unauthorized persons, especially from children.
Never point the light directly to your eyes or the eyes of another person or animal.
Always check the power cord before using the charger. Replace the charger if the power
cord is damaged.
Technical Data:
3,7 V – Li-ion battery, 2.200 mAh
6 × 0,5 W SMD + 2,0 W SMD at the upper side of the lamp
Lumen:
Lumen:
Ambient temperature
Illumination time:
Charging time:
Protection class:
Power supply:
With magnet for attachment to metal surfaces
Charging with the 110-230 V power supply:
Plug the power supply unit into a standard power outlet for 110-230 V AC.
Plug the charger cable into the corresponding socket on the handle.
During charging the red LED is illuminated. When the battery is fully charged the LED turns
green.
Charging with a 12-V cigarette lighter:
Plug the charging adapter into the corresponding socket on the handle.
Insert the Euro plug into the cigarette lighter in the car. Refer to the operating manual of the
car for how the cigarette lighter is used.
During the charging operation the LED is red. When the batteries are fully charged the LED
turns green.
6 SMD = 300 lumens
1 W SMD = 150 lumens
–5 °C up to +40 °C
approx. 3,5 hrs on a single charge.
approx. 6 hrs
III
5 V, 1000 mA