4. INSTALLATION
4.1 LOCATION
1. Place the unit on a firm, level surface in an area with at least 30cm of free space around it to
allow for proper air circulation.
2. Never install the unit where it could be subject to:
⚫ Heat sources such as radiators, heat registers, stoves or other products that products that
produce heat.
⚫ In an area where oil or water may be splashed
⚫ Direct sunlight
⚫ Mechanical vibration or shock
⚫ Excessive dust
⚫ Lack of ventilation, such as cabinet or bookcase
⚫ Uneven surface
⚫
WARNING
nstall the unit in rooms which exceed 4 m².
I
Do not install the unit in a place where inflammable gas may leak.
NOTE
The manufacture may provide other suitable example or may provide additional information
about the refrigerant odour.
9