Publicidad
Idiomas disponibles
Idiomas disponibles
5. OPERATION
5.1
DIGITAL DISPLAY
5.2
CONTROL PANEL
5.3 SETTINGS
Power
In the standby state, press the power button to turn on, the operation indicator lights up and the
default fan speed is high, the LED shows ambient humidity. In the power-on state, press the
power button to turn off, the running indicator light goes off and the compressor stops
immediately, and then the fan shut down after 30 seconds delay.
Mode
Auto mode - continuously drying mode-sleeping mode cycle, press once to switch the mode from
one to another, the corresponding indicator lights up.
● Auto mode: when environmental humidity ≥ set humidity +3%, the fan starts working and
compressor starts working after 3 seconds. When environmental humidity ≤ set humidity -3%,
the compressor stops working and fan stops working after 30 seconds' delay.
Both fan speed and humidity can be adjusted under auto mode.
11
Publicidad
