Braun ThermoScan IRT 6020 Manual De Instrucciones página 7

How does Braun ThermoScan work?
Braun ThermoScan measures the infrared heat generated by the eardrum and
surrounding tissues. When placed in the ear, Braun ThermoScan continuously
monitors the infrared energy and the ExactTemp
a reading only if the thermometer detects that an accurate and stable
temperature measurement has been taken.
How to use your Braun ThermoScan
1
2
Push the Power button
During an internal self-check, the display shows all
segments. Then the last temperature taken will be
displayed for 5 seconds.
The lens filter indicator will
3
blink to signal one is needed.
To achieve accurate
measurements, make sure a
new, clean hygienic lens filter
is in place before each
measurement.
Attach a new lens filter by pushing the thermometer probe straight into the hygienic lens filter
inside the box and then pulling out.
Note: The Braun ThermoScan will not work unless a lens filter is attached.
The thermometer is ready to take a temperature when the display looks like the images below.
Stability Indicator displays
®
Remove the
thermometer
from the
storage cradle
.
English
Remove
protective
cap.
5