Publicidad
Idiomas disponibles
Idiomas disponibles
Unobstructed ventilation shall be maintained around the appliance or in
an embedded structure.
Preparations for use
1. Standing time
After the refrigerator is properly installed and well cleaned, do not switch it on immedia-
tely. Make sure to energize the refrigerator after more than 1 hour of standing, so as to
ensure its normal operation.
2. Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
3. Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the
freezer door, if the temperature inside the freezer compartment drops obviously, it
indicates the refrigeration system is working normally.
4. Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator
will be automatically controlled according to the user's temperature setting. After the
refrigerator is fully cooled, put in foods, which usually need 2~3 hours to be fully cooled.
In summer, when the temperature is high, it takes more than 4 hours for the foods to be
fully cooled (Try to open the refrigerator door as less as possible before the internal
temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether
the ground wire and leakage circuit breaker are normal. If vibration noises are
produced due to the refrigerator contacting the wall or if the wall gets blackened by air
convection around the compressor, move the refrigerator away from the wall. Setting up
the refrigerator may cause jamming noise or image chaos to the mobile phone, fixed-line
telephone, radio receiver, television set surrounding it, so try to keep the refrigerator as
far away as possible in such case.
English-8
Publicidad
