Descargar Imprimir esta página

Euroflex vapour M4S Manual Del Usuario página 13

Publicidad

Idiomas disponibles

Idiomas disponibles

D. USING STEAM (continued)
• To emit steam from the front
jets, press the REAR button on
the handle.
• IMPORTANT: at the end of the
cleaning task, press the button
on the left side to lock the
appliance in safety mode.
IMPORTANT
*
*
The Steam Jets are meant to be used in steam "bursts" and should never be
used on a sustained basis. The Steam jets will loosen especially difficult debris
and will assist in cleaning hard to reach areas such as floor edges.
NOTE: Your Steam Cleaner will not need refilling for about 20-25
minutes of usage.
The Steamer will stop producing steam when the Boiler is empty.
When this happens unplug and store unit or refill with water per
instructions below.
NOTE: If the Floor or Carpet Pad becomes too wet or too dirty,
replace with a clean, dry Pad and continue cleaning.
E. REFILLING BOILER DURING USE
When the Steamer has run out of water, there will be no more steam
coming out of the unit. At this stage it is time to refill the Boiler.
Follow the refilling instructions below.
IMPORTANT
*
*
Use the filling bottle when refilling your Boiler. The filling bottle has a built-
in mechanism that prevents overfilling your Boiler. If you use a measuring
cup to refill, add a maximum of 600ml (2 1/2 cups) of water when the
Boiler is empty.
If cleaning is completed and water remains in the Boiler, the Steamer
can be stored with the remaining water in the Boiler. There will be no
harm done to the unit. At the next cleaning session simply fill the Boiler
using the filling bottle.
REAR
LEFT
BUTTON
Using Your Floor Steamer
13

Publicidad

loading