Philips AVENT SCF291 Manual De Instrucciones página 12

5
Press the power on button to switch on the appliance.
Caution: The base, the baskets and the lid become hot during
or shortly after operation.
Note: You can switch the appliance off by pressing the power
off button.
• The on/off indicator light lights up to indicate that the
appliance starts sterilizing�
• When the sterilization process is finished, the light goes off
and the appliance switches off automatically.
6
Remove the lid.
Wait until the appliance has cooled down before you remove the lid�
Be careful� Hot steam may come out of the sterilizer�
7
Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful� The sterilized items may still be hot�
Note: Make sure you wash your hands thoroughly before you touch the sterilized
items.
8
Unplug the appliance and wait until the appliance has cooled down completely.
9
Remove the small basket and large basket.
Note: When you remove the large basket, be aware of the remaining water on the
base drip tray.
Note: The drip tray is designed to catch milk or food residue and prevent it from
going into the water reservoir of the base. This is to optimize the sterilizing
performance and make the heating element easy to clean.
10
Detach the bottom plate from the large basket. Pour out any remaining water
from the large basket drip tray and clean it (see section "Cleaning").
11
Pour out any remaining water from the water reservoir and wipe it dry.
Note: The appliance does not work for 10 minutes after a sterilizing cycle. It needs to
cool down first.
- English 10 -