Philips AVENT SCF291 Manual De Instrucciones página 8

Getting to know the settings
Note: Before you sterilize bottles and other items, clean them first.
Only place items in the sterilizer which are suitable for sterilizing� Do not sterilize items that
are filled with liquid, e.g. a teether with cooling fluid.
Sterilize
Before first use
When you use the appliance for the first time, we advise you to let it complete one
sterilization process with empty baskets�
1
Use a clean baby bottle and pour exactly 130 ml/4.5 oz water directly into the
water reservoir of the base.
Tip: This appliance has been designed to be used with tap water. In case you live in
an area with hard water, fast scale build-up may occur. Therefore, it is recommended
to use water without minerals such as distilled or purified water to prolong the
lifetime of your appliance. For more information on limescale, see section
"Descaling".
2
Place the large basket on the base.
• Sterilize mode is for sterilizing baby items�
• A sterilizing cycle takes approximately 10 minutes.
• Heating up takes approximately 4 minutes and
sterilizing takes approximately 6 minutes�
• Make sure to pour exactly 130 ml/4�5 oz water directly
into the water reservoir of the base �
- English 6 -
130ml
130ml