Toro Flex-Force Power System 60V MAX Manual De Instrucciones página 11

Specifications
Model
Rated Voltage
Charger Type
Battery Type
Appropriate Temperature Ranges
Charge/ store the battery pack
at
Use the battery pack at
Use the blower at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous.
51821, 51821T
60V DC maximum, 54 VDC
nominal usage
Toro 60V lithium-ion chargers
Toro 60V lithum-ion batteries
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)
Operation
WARNING
The blower can throw debris, possibly
causing serious personal injury to you or
bystanders.
• Do not blow hard objects, such as nails or
bolts.
• Do not operate the blower near bystanders
or pets.
• Be careful of blowing direction (i.e.,
blow away from bystanders, windows,
automobiles, etc.). Only use as much
speed as required.
• Use extra care when cleaning debris from
stairs or other tight areas.
Starting the Blower
Important:
Use the battery pack only in
temperatures that are within the appropriate
range; refer to Specifications (page
1. Make sure that the vents on the blower are clear
of any dust and debris.
2. Align the cavity on the battery pack with the
tongue in the handle housing
3. Grasp the handle, and push the battery pack
into the handle until the latch locks into place
(Figure 6).
1. Battery latch
4. To start the blower, squeeze the variable-speed
trigger (Figure
Note:
Engage the speed lock to keep the
machine on without pressing the variable-speed
trigger (Figure
9
9).
(Figure
Figure 6
7).
7).
6).
g273146