Descargar Imprimir esta página

STAMOS X-METAL Manual De Instrucciones página 29

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 123
c)
The unit may be operated by persons who are physically fit, capable of
operating it, and appropriately trained, and who have read this instruction
manual and have been trained in occupational safety and health.
d)
Use caution and common sense when operating this unit. A moment's
inattention during the operation may result in serious personal injury.
e)
Use personal protective equipment as required when operating the unit as
specified in Section 1 of the explanation of symbols. The use of appropriate,
approved personal protective equipment reduces the risk of injury.
f)
The product is not a toy. Children should be watched to ensure that they do
not play with the appliance.
g)
Pay special attention to the condition of the lens of the unit (shielding,
filtering). Components that are damaged (cracks, scratches, etc.) should be
replaced immediately!
h)
Before each use of the unit, check the transparency of the lenses/sensors.
Clean the individual elements from contamination (dust, dirt, etc.). Use a
microfiber cloth for this purpose. Always keep the sensors and photosensitive
elements clean.
i)
The front surface of the unit should be cleaned regularly.
j)
Welding in an overhead position when using the unit is forbidden.
k)
Do not use the unit in the vicinity of corrosive liquids or explosive materials.
Use extreme caution.
l)
Properly adjust the self-shielding filter and the fasteners (elastic bands) before
operating the unit.
m) Do not touch the device with wet or damp hands.
n)
Do not immerse the unit in water.
o)
Do not use solvents to clean the filter or the whole unit.
Remember!
2.3. Safe use of the product
a)
Keep unused appliance out of the reach of children and anyone unfamiliar with
the appliance or this manual. Products are dangerous when used by
inexperienced users.
b)
Keep the product in good working order. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
return the device for repair before use.
c)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
d)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
Keep children and other bystanders safe while operating the
appliance.

Publicidad

loading

Este manual también es adecuado para:

X-sparkX-starX-proweld