KitchenAid 5KSM1APC Manual Del Propietário página 5

SPIRALIZER ATTACHMENT BLADE CHART
(CONTINUED)
USE THESE PARTS
Slicing Blade (Small Core)
Slicing Blade (Large Core)
Peeling Blade
NOTE: This Attachment is designed for use with a wide variety of fruits and vegetables. It is
not designed for use with thick-skinned and/or soft fruits and vegetables, such as citrus and
tomatoes.
PRODUCT ASSEMBLY
Before first use
Before using your Spiralizer Attachment for the first time, wash all parts and accessories either
by hand or in the dishwasher (see the "Care and Cleaning" section).
ATTACHING THE SPIRALIZER TO THE STAND MIXER
1.
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
For Stand Mixers with a removable attachment hub cover: Turn the attachment knob
counterclockwise to remove attachment hub cover.
2.
Insert the Spiralizer Attachment shaft housing into the attachment hub, making certain that
the power shaft fits into the square hub socket. Rotate the Spiralizer Attachment back and
forth if necessary. The pin on the shaft housing will slip fully into the notch on the hub rim
when it's in the proper position.
3.
Tighten the attachment knob until the Spiralizer Attachment is completely secured to the
Stand Mixer.
PRODUCT USAGE
IMPORTANT: To prepare food before spiralizing, wash food, then remove stems, cut the ends
off squarely, and remove any eyes, if applicable.
1.
Install Fruit and Vegetable Skewer by slipping onto the skewer mount, and twisting
counterclockwise until it clicks into place.
2. Place bowl or plate under the Spiralizer Attachment, then affix food to the Fruit and
Vegetable Skewer.
3.
Install desired Blade.
4.
Pull the Release Lever, then push the Blade Carrier towards the Stand Mixer to align the
blade core with the centre of the food.
5.
Press blade core into food for added stability.
IMPORTANT: When finished, remove the Blade before removing your food item.
WITH THESE PARTS
Fruit and Vegetable Skewer and
Optional Peeling Blade
Fruit and Vegetable Skewer
STAND MIXER
SPEED
4
6
4
5