Worx WA0223 Manual De Instrucciones página 9

COMPONENT LIST
1. DEBRIS FLAP
2. BLADE
3. BLADE HOUSING
4. BLADE NUT
5. BLADE GUARD
6. GUIDE WHEEL
7. ADJUSTING KNOB
Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Cutting depth
Cutting diameter
Machine weight
NOISE INFORMATION
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
Uncertainty
The declared vibration total value and the declared noise
emission value have been measured in accordance with a
standard test method and may be used for comparing one
tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
Edger Attachment
the declared value depending on the ways in which the
tool is used especially what kind of workpiece is processed
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome if
its use is not adequately managed.
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
WA0223
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise
64mm
exposure risk.
Always use sharp chisels, drills and blades.
20cm
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
1.91kg
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
ACCESSORIES
L = 78.94dB(A)
pA
3dB(A)
L = 98.94dB(A)
wA
Hex key
3dB(A)
Wrench
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
ah =2.624m/s2
K = 1.5m/s²
WARNING: The vibration and noise emissions
during actual use of the power tool can differ from
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
9
WA0223
1
1
EN