Royal Catering RCRO-104 Manual De Instrucciones página 14

Use the device in a well-ventilated area.
3.3. Assembling the device
3.3.1. Door lock installation
Using a screwdriver, loosen the screws attached to the door lock.
Open the door, first align the door lock with the hole at the front and then tighten the screw from the
inside.
3.3.2. Assembly of the carbon box holder
Using a spanner, loosen the screw attached to the coal box handle.
Pull out the coal box, put the handle against the holes and tighten the screws from the inside.
1 - Nut
2 - Serrated washer
3 - Rubber washer
4 - Handle
5 - Baffle plate
6 - Bolt
1 - Bolt
2 - Carbon box
3 - Handle