Publicidad
Idiomas disponibles
Idiomas disponibles
GB
GB
Max. speed, spool n
Vibration on handgrip
(a
) ................ 3.690 m/s
h
Vibration on round handle
(a
) ................ 4.320 m/s
h
Sound pressure level
(L
) .....................82 dB(A); K
pA
Sound power level (L
measured .. 93.6 dB(A), K
guaranteed .......................... 96 dB(A)
Brush cutter
Cutting diameter, 3-tooth blade .. 25 cm
Speed, blade n .......................7500 rpm
Max. speed, blade n
Vibration on handgrip
(a
) ................ 3.690 m/s
h
Vibration on round handle
(a
) ................ 4.320 m/s
h
Sound pressure level
(L
) .....................82 dB(A); K
pA
Sound power level (L
measured .. 93.6 dB(A), K
guaranteed .......................... 96
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission value
may differ during actual use of the power
tool from the stated value depending on
the manner in which the power tool is
used.
Try to keep the exposure to vibrations as
low as possible. Examples of measures
to reduce vibration exposure are the
120
........ 13300 rpm
max
; K= 1.5 m/s
2
; K= 1.5 m/s
2
= 3 dB
pA
)
WA
= 2.24 dB
WA
........10000 rpm
max
; K= 1,5 m/s
2
; K= 1,5 m/s
2
= 3 dB
pA
)
WA
= 2.24 dB
WA
dB(A)
wearing of gloves when using the tool
and limiting the working hours. For this
purpose all parts of the operating cycle
2
have to be considered (for example, times
when the electric tool is switched off and
2
times when it is switched on but running
without any load).
Notes on Safety
This section describes the basic
safety rules when working with the
device.
This device must not be used by
children. Children should be su-
pervised to ensure that they do
2
not play with the device. Cleaning
and maintenance must not be car-
2
ried out by children.
The device must not be used by
persons with impaired physical,
sensory or mental capabilities, or
anyone who does not have suffi-
cient experience or knowledge.
Symbols in the manual
Warning symbols with
information on damage
and injury prevention.
Instruction symbols with in-
formation on preventing dam-
age.
Wear cut-resistant gloves.
Help symbols with informa-
tion on improving tool han-
dling.
Publicidad
