Publicidad
Idiomas disponibles
Idiomas disponibles
6) Service
a) Have your power tool ser-
viced by a qualified repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
Safety information for lawn
and lawn edge trimmers
Training
a) Read the instructions carefully.
Familiarise yourself with the cont-
rols and proper use.
b) Never allow people who are
not familiar with the instructions
or children to use the machi-
ne. Local regulations may spe-
cify an age limit for the user.
c) Children, individuals with limited
physical, sensory or mental ca-
pabilities, as well as those who
have insufficient experience or
knowledge or are not familiar
with the instructions must never
be permitted to use the device.
Local regulations may specify
an age limit for the user.
d) Note that the user is responsib-
le for any accidents or risks to
others and their property.
Preparation
a) Before use, check the machine
for damaged, missing or incor-
rectly installed safety devices
or covers.
b) Never use the device if people
– especially children – or pets
are nearby.
Operation
a) Always wear eye protection,
long trousers and sturdy shoes
whenever using the machine.
b) Do not use the machine in poor
weather, especially if there is a
risk of lightning.
c) Use the machine only in day-
light or with good artificial ligh-
ting.
d) Never use the machine if the
cover or guard is damaged, or
without a cover or guard.
e) Only switch on the motor when
your hands and feet are out of
the range of the cutting unit.
f) Always disconnect the machi-
ne from the power supply (i.e.
remove the removable battery)
1) whenever leaving the ma-
chine unattended,
2) before removing blockages,
3) before checking, cleaning or
modifying the machine,
4) after contact with a foreign
object,
5) if the machine begins to vi-
brate in an unusual way.
If the device starts to vi-
brate abnormally strong,
an immediate inspection is
required.
- search for signs of damage;
- have any necessary
repairs carried out on
damaged parts;
– make sure that all nuts,
bolts and screws are pro-
perly tightened.
g) Be careful to avoid injuries
to your feet and hands by
the cutting unit.
GB
125
Publicidad
