Xiaomi Redmi Smart Band 2 Manual Del Usuario página 4

How to Install
1. Insert one end of the fitness tracker into the slot
from the front of the wristband.
2. Press down on the other end with your thumb to
push the fitness tracker completely into the slot.
Disassembling
Remove the band from your wrist, hold on to each
end and pull on the wristband until you see a small
gap between the fitness tracker and the wristband.
Use your finger to pop the fitness tracker out of its
slot from the front side of the wristband.
Charging
1. When using the band for the first time, connect it to
the charging cable to turn it on.
2. Recharge your band immediately when the battery
level is low.
02