Description Of The Unit - Lenco L-90X Manual Del Usuario

1. DESCRIPTION OF THE UNIT

1. Counterweight, use the counterweight to balance the tone arm.
2. Anti-Skating control: sets the anti-skating. Use anti-skating to prevent the cartridge from
swinging in towards the centre.
3. Tone arm lever: lowers or raises the tone arm.
4. Tone arm lock: locks the tone arm if the turntable is not in use.
5. Head shell: holds the removable stylus. When the turntable is not in use, it is recommendable
to place the removable protection cover on the stylus.
6. Platter: this is where you place your record, before playing it.
7. 33/45 RPM switch: sets the playing speed.
8. Phono socket: audio output to an amplifier.
9. Pre-Amp On/Off Switch: switches the pre-amp to on or off.
10. USB port: connects the turntable to your computer.
11. Auto stop switch: this function is for 33 RPM records only. After the record is finished, the
platter automatically stops rotating.
12. DC in socket
13. Power On/Off switch: switches the power On/off. To save power, please power off the unit
once don't use/operate the equipment.
Important note: This turntable has a built-in amplifier to avoid damage to the turntable or to
your audio-system. Do not connect this turntable to your audio-system by using the phone-input
as this input is amplified as well.
5