Makita DHR183 Manual De Instrucciones página 2

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Drilling capacities
No load speed (RPM)
Blows per minute
Overall length (with BL1860B)
Rated voltage
Net weight
Optional accessory
Model:
Suction performance
Operating stroke
Suitable drill bit
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Concrete
Steel
Wood
2.1 - 2.9 kg (4.6 - 6.4 lbs)
Up to 105 mm (4-1/8")
Up to 165 mm (6-1/2")
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
2 ENGLISH
DHR183
18 mm (11/16")
13 mm (1/2")
24 mm (15/16")
0 - 1,100/min
0 - 5,000/min
288 mm (11-3/8")
D.C. 18 V
DX16
0.24 l/min
0.77 kg (1.7 lbs)
PDC01