EGO SUN SHADE AMS1000 Manual Del Operador página 5

WARNING: Before assembly or installation, place the Zero Turn Mower on a firm and level surface and set the
parking brake. Stop the motors and remove the safety key to prevent unintended starting.
UNPACKING
◾
This product requires assembly and installation on the Zero Turn Mower.
◾
Carefully remove all parts from the box. Make sure that all parts in packing list are included.
◾
Inspect the parts carefully to make sure that no breakage or damage occurred during shipping.
◾
Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
◾
If any part is damaged or missing, please return the product to the place of purchase.
NOTE: Left and Right position are determined from the operator's position while seated on the mower.
1. Park the mower on a level surface and set the parking brake.
2. Stop the motors and remove the safety key.
3. Remove the two attachment mounting covers from the mower to expose two mounting holes (Fig. 1). Place the
attachment mounting covers in the storage compartment of your mower.
4. Insert the posts into the mounting holes of the mower as shown in Fig. 2.
1
Attachment
Mounting
Cover Storage
Attachment Mounting Covers
2
Post
Mounting Hole
SUN SHADE — AMS1000
5