Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR UNPACKING AND ASSEMBLY
Unpacking and cleaning the jointer.
Your new jointer and cabinet are shipped in two packages.
Carefully unpack the jointer, cabinet and all small parts from each
of the packages. Fig. 2 and 3 illustrate all parts shipped in the
jointer packages.
WARNING: The jointer is extremely heavy. It is suggested that
lifting or carrying the jointer or the jointer mechanism be done
by at least two people.
Fig. 2
6
15
14
1. Jointer
2. Table lifting handle
3. Tilting handle of support guide
4. Cutting head guard
5. Cutting head pulley guard
6. Guide support assembly
7. 8 mm Allen wrench
8. 6 mm Allen wrench
9. 4 mm Allen wrench
1
8
10
13
12
Remove the protective coating from the table surface and all
unpainted parts. This coating can be removed with a soft cloth
dampened with kerosene (do not use acetone, gasoline, or
thinner).
After cleaning, coat the table surface with a good quality wax
paste. Spread the wax perfectly on the worktable to avoid friction
with the workpiece.
5
4
7
9
11
10. 3 mm Allen wrench
11. 2.5 mm Allen wrench
12. 8 mm – 10 mm wrenches
13. 12 mm – 14 mm wrenches
14. Support blocks (2)
15. Support guide
16. Switch
17. Blade calibrator assembled set
16
2
3
17
5
Publicidad
