Silvercrest SKHO 50 B2 Instrucciones De Uso página 18

Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Troubleshooting
Fault causes and remedies
If you cannot connect the headphones to a Bluetooth
proceed as follows:
Make sure that the Bluetooth
♦
♦ Make sure that the audio cable
headphones. When an audio cable
the headphones is deactivated.
♦ Check that the headphones are switched on.
If you use several Bluetooth
♦
tion is disconnected. There may be a previously paired playback device still within
range.
♦ Make sure that the headphones are no more than 10 metres from the playback
device and that no obstacles or electronic devices are placed between them.
NOTE
► In an environment with high-frequency interference, you may experience noise
interference during music playback via Bluetooth
ceased, music playback should automatically continue in Bluetooth
any further problems.
SKHO 50 B2
®
®
function is activated on the playback device.
w
is connected to the AUX IN socket
w
is connected, the Bluetooth
®
playback devices, ensure that any previous connec-
®
-compatible playback device,
8
. As soon as the interference has
®
mode without
GB │ IE
of the
®
function of
│
15 ■