Publicidad
Idiomas disponibles
Idiomas disponibles
2.5 residual risks when using the unit
There is danger that during operation a hydraulic hose bursts or a screw fastening leaks.
This means oil can escape at high pressure.
• Always wear your personal protective equipment for all work performed on the unit
(see section 2.4 "Personal protective equipment").
There is the danger that small particles are ejected at high speed from the ma- chining area
(e.g. because of tool breakage).
• Always wear your personal protective equipment for all work performed on the unit
(see section 2.4 "Personal protective equipment").
If the unit machines busbars made of an impermissible material or from an excessively thick material,
there is the risk of the tools becoming damaged and tool parts splitting off.
• Perform machining on materials only in accordance with the proper usage (see section 3 "Proper usage")
and the technical specifications (see section 4 "Technical specifications").
3. proper Usage
The "busbar cutting device" (Model No.03855.L) is a single- acting high-pressure hydraulic unit for clean
cutting copper or aluminium bars with a maximum width of 120 mm and a maximum height of 12 mm.
The unit is not suitable for cutting structural steels or tool steels. The electro-hydraulic pump with the
associated foot-operated switch must be used as the drive for the "busbar cutting device".
4. technical speciFications
tab. 1 technical specifications
Model No. and designation
Max. pressure
Max. cutting force
Max. delivery rate
Permissible materials
Max. busbar width
Max. busbar height
Laser (line laser)
Weight
Permissible hydraulic pump
5. available accessories
tab. 2 available accessories
beschreibung
Electro-hydraulic pump
Foot-operated switch
Support rollers for busbars
03250.L busbar cutting device
700 bar (10150 psi)
230 kN (52200 lbs)
1,95 l/min (0,5 gal/min)
Copper, aluminium
120 mm (4,72")
12 mm (0,47")
0,4 mW, Class 1 Laser; MTBF>10.000 h
20,5 kg (40 lbs)
Electro-hydraulic pump
art.-nr.
03857
03862
17
Publicidad
