FAFREES F1 Manual Del Usuario página 9

4.After the front wheel is installed, turn the bicycle back to normal stand. Loosen the
4 screws of the handlebar stem, place the handlebar and adjust the horizontal angle
of the handlebar, and then fix it with the pipe clamp screws.
5.Tighten each fixing screw with a hexagonal key to fix the handlebar stem to ensure
that there is no looseness of the handlebar.
6.Install the front light. Loosen the front light fixing screw on the front fork. Snap the
headlight into the screw from the bottom up. Hold the rear nut with a wrench, turn the
locking screw and washer clockwise with an Allen wrench, and adjust the angle of
the headlight.
EN 06