Descargar Imprimir esta página

MADER AGW-180E Manual página 50

Publicidad

Idiomas disponibles

Idiomas disponibles

W
S
ATER
UPPLY
(C
W
O
)
OLD
ATER
NLY
Water hose must be at least 3/4 inch in diameter.
Flow rate of water supply must be more than 1.85 GPM (gallons per minute).
Flow rate can be determined by spraying the water into an empty 5-galons container for one
minute.
The water supply temperature must not exceed 50℃
Never use water contained with solvents, e.g. paint thinners, gasoline, oil, etc.
Always prevent debris from being drawn into the unit by using a clean water source.
We strongly recommend that this high-pressure washer should not be left running without the
trigger gun being engaged for more than 3 minutes or longer.
Caution
Follow the maintenance instructions specified in the manual.
47

Publicidad

loading