Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
CAUTION! The powerful spray from your pressure washer is capable of causing damage to
surface such as: wood, glass, automobile paint, auto striping and trim, and delicate objects such
as flowers and shrubs. Before spraying, check the item to be cleaned to assure yourself that it is
strong enough to resist damage from the recoil force.
Operating unit with water supply shuts-off without flow of water will result in equipment
damage. Operating the pressure washer with water supply shut-off will void your warranty. You
should never run this pressure washer for more than 2 minutes without pulling the trigger to
allow cool water to enter the pump.
WARNING! Read owner's Manual. Do not operate equipment until you have read Owner's
Manual for Safety, Operation, and Maintenance Instruction.
A
SSEMBLY
Step1
Attach the handles to the frame of the pressure washer. Align holes insert bolts,
and tighten with knobs.
Step 2
Attach the wand to the spray gun. Tighten securely.
Step 3
Attach the high-pressure hose to the spray gun. Tighten securely.
Step1
O
P
PERATING
ROCEDURES
ATTENTION:
Become familiar with the operating procedures before starting your unit.
1)
Add fresh high-quality unleaded gasoline. See Engine Operation for correct amount
and type.
2)
Check oil level. See Engine Operation for correct amount and type.
3)
Connect high pressure hose to pump outlet. (see picture B)
4)
Connect water source to pump inlet. There is plastic tap connector equipped with
pump, connect your own connector to it, and screw tightly.
(See picture A)
Step 2
(S
-U
)
TART
P
48
Step 3
Publicidad
