vivi M026TGB Manual De Usuario página 16

5.5 Installation of saddle
Applicable to models M026TGB/M026SH/26LGB/H6/H7/H8/H9/F26F
Connect the seat and seat tube first. Insert the seat tube into rod receiver, and adjust the
position and height according to your riding habit. Tighten the seat with clamps. Notice:
Please do not exceed the maximum saddle height. Do not lift the saddle to the position
above the safety line.
5.6 Installation of rear reflector
Applicable to models M026TGB/M026SH/26LGB/H6/H7/H8/H9/F26F
Take out the red reflector, install the reflector on the saddle tube, and tighten the screws
with the tool No. 9 (cross screwdriver) to complete the installation of the rear reflector.
12