vivi M026TGB Manual De Usuario página 22

6.4 Bike startup
6.4.1 When the battery is locked on the frame, turn on the battery switch. Then, long
press the
the electric bike is at the power-on state.
Pure electric bike (pure electric mode): Rotate the Throttle lever (right handlebar)
6.4.2
inward (anticlockwise), start the bike, adjust the rotating angle of speed control
handlebar from small to large, and the speed is changed from slow to fast. The
speed can be adjusted by adjusting the tap position.
6.4.3
Bike assisted by pedal (boost mode): Step on the pedal. As the dish of chain
wheel rotates, the motor will be started.
6.5 Speed limit release
6.5.1 Applicable to models M026TGB/M026SH/26LGB/H6/H7/H8/H9
Step 1:
Step 2:
Tips:
To restore the factory configuration after releasing speed limit, repeat Step 1 and 2.
6.5.2 Applicable to model F26F
Step 1:
Step 2:
Tips: To restore the factory configuration after releasing speed limit, repeat Step 1 and 2.
6.5.3 Speed introduction
Applicable to models M026TGB/M026SH/26LGB/H6/H7/H8/H9/F26F
Mode
Default mode
(speed limit)
Customer mode
(speed limit release)
18
button of the Meter panel for 2 seconds to power it on. At this time,
Long press the "
power on, and adjust the speed to the "high" position;
Long press "+" and "-" for 3-5 seconds simultaneously to release the speed
limit;
Long press the "
power on, and adjust the speed to the Gear "3";
Long press " " and "-" for 3-5 seconds simultaneously to release the
speed limit;
Indicator off
0km/h
0km/h
" button of the Throttle lever panel for two seconds to
" button of the Throttle lever panel for two seconds to
Low/Gear 1
15km/h
15km/h
mid/Gear 2 high/Gear 3
20km/h
20km/h 32 km/h
25km/h