vivi M026TGB Manual De Usuario página 17

5.7 Installation of battery
5.7.1 Applicable to models M026SH/H6/H7/H8/F26F
Open the battery box, put the battery in a correct angle,
insert it into the bracket gently, and press it for automatic
locking. Insert the key into the keyhole and rotate to align
the key with the "off" icon. At this time, the battery is
locked and cannot be removed. If you need to remove the
battery, please follow the instructions in 6.3.2 to complete
the operation.
5.7.2 Applicable to models M026TGB/26LGB/H9
First, install the battery bag on the handlebar, then pull out the power line connector
from under the battery bag, find the power line connector, and insert the power line
connector of the battery to complete the installation of the battery.
5.8 Adjust the angle of Brake levers, Meter, gear lever, accelerator and bell on
the handlebar, and tighten them with tools.
Congratulations! You have assembled the whole bike.
13