INVENTOR COOL FCOOL-8BS Manual De Usuario página 23

Installation and disassembly of the exhaust pipe
● CORRECT INSTALATION as shown in figure (When the exhaust pipe is installed on a wall, the
minimum height is 40cm and the maximum is 130cm from the ground).
● INCORRECT INSTALATION as shown on figure (the pipe should not be bend at any point to
allow normal unobstructed airflow)
Disassemble heat discharge pipe
1. Remove joint B: remove joint B
from joint C.
joint B
joint C
2. Remove joint A:
Press the clasp and lift joint A upwards to
remove it.
clasp
21
upwards
disassemble
joint A