Descargar Imprimir esta página

Taurus RESPIRE Manual De Instrucciones página 8

Publicidad

English
Air fryer
RESPIRE
DESCRIPTION
A Control panel
1. Heating indicator - will illuminate when
element is on
2. Fan indicator - will illuminate when the fan is
on
3. Temperature and Timer display- will
alternate between the temperature and timer
functions when ON
4. Temperature increase button
5. Temperature decrease button
6. Preset mode button
7. Power ON/OFF button
8. Timer decrease button
9. Timer increase button
B Air outlet
C Power cable and plug
D Outer container
E Frying basket
F Grill
G Basket handle
H Power light
I
Heating status light
If the model of your appliance does not have
the accessories described above, they can also
be bought separately from the Technical
Assistance Service.
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
- Do not use the appliance when empty.
- Do not use the appliance if the timer is not
operating correctly.
- Do not move the appliance while in use.
- To keep the non-stick coating in good condition,
do not use metal or pointed utensils on it.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Store this appliance out of reach of children
and/or those with reduced physical, sensorial
or mental abilities or who are unfamiliar with its
use
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging
material has been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to an earthed mains
socket.
- Open the basket and place the ingredients you
wish to fry, roast or onit.
- Put the basket back into the appliance.
- Press the ON button on the control panel, the
control panel will light up white.
- * The control panel will display the pre-set 15
minutes and 180ºC program
TEMPERATURE AND TIME
- You can change the time and temperature by
using the up and down buttons.
PRE-SET PROGRAMS
- This appliance has 6 pre-set programs
- To select the program, press the menu button
you can move from one program to the next by
pressing this button.
- *If you wish, you can also change the tempera-
ture and time settings for the pre-set programs.
- To select the program, you only need to keep in
the program, heating will start in 3 seconds.
SHAKE
- If you want to shake food halfway through coo-
king, you can simply remove the tray from the
appliance and shake it.
- The process will continue its course after put
again the basket inside the air fryer.
FINISH THE PROGRAM
- The fryer will beep when the cooking time has
finished.
- Check to see that the food is cooked.
- If it is not, you only have to put the container
back in the fryer and program the timer to cook

Publicidad

loading