Genesis GAG1570 Manual Del Operario página 8

KNOWING YOUR ANGLE GRINDER
3
5
UNPACKING AND CONTENTS
IMPORTANT:
Due to modern mass production techniques, it is unlikely the tool is
faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could
result in serious personal injury.
CONTENTS IN PACKAGE
Description
Angle Grinder
Auxiliary Handle
Grinding Wheel 1 Operator's Manual
ASSEMBLY AND ADJUSTMENTS
WARNING:
adjusting, adding accessories, or checking a function on the tool.
INSTALLING THE AUXILIARY HANDLE
Your grinder is equipped with a three-position auxiliary handle. It can be mounted on either the left side, right
side or top of the die-cast gear housing. Generally, a right handed operator will grip the body of the grinder with
their right hand and grip auxiliary handle, mounted to the left side of the gear housing, with their left hand. The
opposite gripping and auxiliary handle placement is generally used by a left handed operator. Occasionally,
auxiliary handle placement needs to be changed to accommodate the requirements or restrictions of the
operation being performed.
To Mount the Auxiliary Handle to the Grinder,
the left side, right side or top of the die cast gear housing.
INSTALLING OR REMOVING WHEEL GUARD (FIG 2)
To Mount the Wheel Guard
1. Open the lever (4a) to release the tension on the guard clamp.
7" Angle Grinder
Operator's Manual
4
7
6
Q'ty Description
1 Wheel Guard
1 Spanner Wrench
Always be sure that the tool is switched off and unplugged before
simply securely screw the handle into the threaded hole on
1
1. On/Off Switch
2. Auxiliary Handle
2
3. Spindle Lock
4. Wheel Guard
5. Grinding Wheel
6. flanges
7. Spanner Wrench
FIG 1
Q'ty
1
1
1
GAG1570