Dometic Frigo DC VAK Instrucciones De Montaje página 7

Frigo DC VAK
4 Vehicle data
Data
Vehicle:
Type designation:
Construction:
Wheelbase (mm):
Year of manufacture: >2012
5 Intended use
The Frigo DC VAK vehicle-specific holder was designed for installation of the DC
unit, which is installed under the vehicle instead of the spare tire.
Any use other than or beyond that purpose constitutes use other than intended.
6 Scope of delivery
The Frigo DC VAK for the Frigo DC transport refrigeration system consists of the
following components:
• 1 base frame (fig. 1 1)
• 1 holder, rear left (fig. 1 2)
• 1 holder, rear right (fig. 1 3)
• 2 holders, top front (fig. 1 4)
• 2 holders, bottom front (fig. 1 4)
• Fastening material (fig. 1 5):
– 6 x M8 x 20 bolts
– 2 x M8 x 25 bolts
– 2 x M8 x 30 bolts
– 12 x M8 Ø24 washers
– 4 x M8 spring washers
– 6 x M8 nuts
– 2 x M8 pull-in nuts
EN
Description
Mercedes Citan/Renault Kangoo
415/X61
Van long/extra long
2697/3081
Vehicle data
5