Publicidad
Idiomas disponibles
Idiomas disponibles
3. ASSEMBLY
Before using the appliance, remove all packaging and inspect the
appliance for any damage. If there is any damage on the product,
please take the unit back to the store where you bought this
appliance.
The fan is packaged with the grill disassembled. You must
assemble the grills before operating the fan.
Never operate the fan without its base and other parts.
Operate the fan only in vertical position; any other position
may be dangerous for the user.
Assemble the base and other parts of the appliance considering the
following notes.
If the appliance is going to operate as stand fan
Unpack the fan and remove all packaging parts.
Insert the lower tube (15) into the base's hole(16), place the
washer (17) under the base and press the base with the
screw with L form (18) in clockwise direction.
Insert the upper tube (13) into the middle of the lower tube
(15), line up the screw with screw's hole and tighten the
screw.
Insert fans' head (10) in the middle of upper tube and line up
screw's hole, then tighten the screw (11).
Use the nut attachment (4) to set the back grille (5) to the
fan's head (6). Now, use the attachment nut of the blade (2)
to set fan's blade (3).
To place the front grille into the back grille, you must use the
grille ring carefully to keep them together and tighten the ring
with the screw provided.
17
Publicidad
