Specifications - WIKA Intelli Therm TGT70 Manual De Instrucciones

3. Specifications

3. Specifications
Specifications
GB
Measuring principle
Nominal size in mm
Filling medium
Connection location
Instrument version
H
■
M
■
B
■
V
■
R
■
Indication accuracy
Capillary
Capillary entry
Capillary mounting
Case and bayonet ring
Connection
Stem
Active sensor length
Dial
Pointer
Window
Ingress protection
Electronics
Output signal
Voltage output
■
Current output
■
Power supply (U
Electromagnetic compatibility EMC directive 2004/108/EC, EN 61326 emission (group 1,
8
intelliTHERM
Bourdon tube system
63, 100
Xylol or silicone oil
Lower mount (LM) (radial)
Version B: back mount (axial)
Instrument with capillary and rear surface mounting flange
Instrument with capillary and surface mounting bracket
Instrument with capillary, triangular bezel and mounting clamp
Instrument with capillary and panel mounting flange
Direct connection without capillary
Class 2, EN 13190
Length in accordance with customer specifications (max. 10 m)
Ø 2 mm, stainless steel 1.4571, bending radius no less than 6 mm
lower mount
Take care that the mounting is free from vibration
Stainless steel
plain, stainless steel 1.4571
Ø 8 mm, stainless steel 1.4571
Depends on Ød and scale range
Plastic sticker, white with logo
Aluminium, white, black lettering
Aluminium, black
Laminated safety glass
IP 65 per EN/IEC 60529
With U
With U
4 ... 20 mA, 2-wire
) DC 5 V / DC 12 ... 32 V
s
class B) and interference immunity (industrial application)
model TGT70
®
= DC 5 V, ratiometric: 0.5 ... 4.5 V
s
= DC 12 ... 32 V, non ratiometric: 0.5 ... 4.5 V
s
WIKA operating instructions model TGT70