Tripp-Lite B021-SWHD-K Manual Del Propietário página 13

5. Installation
7
The front ears of the KVM switch are hook-shaped. Hook the front ears onto the rack, making sure that the right ear is
hooked between the two Velcro management straps.
8
Push the KVM switch into the rack. Using two (2) M4x6 screws, stabilize the KVM switch.
9
When completed, the cables should be managed between the KVM switch and the rail.
M4x6 Screws
Velcro Cable
Management
Cables
13
Strap