Descargar Imprimir esta página

Tripp-Lite B021-SWHD-K Manual Del Propietário página 18

Consola kvm hdmi de poca profundidad para instalación en rack
Ocultar thumbs Ver también para B021-SWHD-K:

Publicidad

Idiomas disponibles

Idiomas disponibles

6. Operation
6.3 Hot Plugging
B021-SWHD-K supports hot plugging – devices can be removed and added to the console by unplugging their cables
from the ports without needing to shut down the console.
6.4 Powering Off and Restarting
If it becomes necessary to Power OFF the B021-SWHD-K (to upgrade the firmware, for example), simply turn off the
power to the unit using the rear-panel power switch. To restart the B021-SWHD-K, turn the rear-panel power switch to ON.
6.5 Port ID Numbering and Port Selection
If you connect a KVM switch to the B021-SWHD-K, Port ID numbering and Port Selection follow the method used by the
connected KVM switch. Consult your KVM switch's Owner's Manual for details.
6.6 Hotkeys
Key
Function
[Ctrl] [Alt] [Shift] [P]
Selects normal mode (pc, etc.).
[C] [Enter]
[Ctrl] [Alt] [Shift] [M]
Selects Mac.
[A] [C] [Enter]
[Ctrl] [Alt] [Shift] [S]
Selects Sun.
[U] [N] [Enter]
[Ctrl] [Alt] [Shift] [u]
Activates Firmware Upgrade Mode.
[p] [g] [r] [a] [d] [e]
Note: This hotkey sequence only works when the firmware upgrade switch is in
[Enter]
the Normal position. Refer to section 8.1 Firmware Upgrade Mode for more
information.
[Ctrl] [Alt] [Shift] [L]
Enable Local (LCD) console; disable 2nd console or external console
[Enter]
video.
[Ctrl] [Alt] [Shift] [R]
Enable 2nd console, or external console video; disable Local (LCD)
[Enter]
console.
[Ctrl] [Alt] [Shift] [L]
Enable both consoles (default).
[R] [Enter]
or
[Ctrl] [Alt] [Shift] [R]
[L] [Enter]
[Ctrl] [Alt] [Shift] [U]
Configures the front USB Port to mouse mode (mouse functionality is
[M] [Enter]
immediate upon switching to USB mouse mode).
Note: USB mouse mode [U] [M] is the default.
[Ctrl] [Alt] [Shift] [U]
Configures the front USB port to peripheral mode.
[P] [Enter]
[Ctrl] [Alt] [Shift] [F4]
Print the switch's current settings via text editor or word processor.
[Enter]
[Ctrl] [Alt] [Shift]
Set the KVM port to USB full speed.
[F11] [F] [Enter]
[Ctrl] [Alt] [Shift]
Set the KVM port to USB low speed.
[F11] [L] [Enter]
18
Beeps
LEDs
2
None
2
None
2
None
None
3 flashing
(when
upgrade is in
process)
2
None
2
None
2
None
2
None
2
None
None
None
2
None
1
None

Publicidad

loading