Publicidad
Idiomas disponibles
Idiomas disponibles
4. Important Safety Instructions
• Avoid circuit overloads. Before connecting equipment to a circuit, know the power supply's limit and never exceed it.
Always review the electrical specifications of a circuit to ensure that you are not creating a dangerous condition or that
one doesn't already exist. Circuit overloads can cause a fire and destroy equipment.
• This unit is suitable for installation in information technology rooms in accordance with Article 645 of the National
Electrical Code NFPA 75.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause
the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
4.2 Rack-Mounting Safety Instructions
• The ambient operating temperature in the rack may be an issue and is dependent upon the rack load and ventilation.
When installing in a closed or multi-device rack assembly, ensure the temperature will not exceed the maximum rated
ambient temperature.
• Before installing the rack, ensure the stabilizers are secured to the rack, extended to the floor and the full weight of
the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks
before working on the rack.
• Always load the rack from the bottom up with the heaviest item loaded into the rack first.
• When loading the rack, avoid creating a hazardous condition due to uneven loading.
• Ensure the rack is level and stable before extending a device from the rack.
• Use caution when pressing the rail release latches or sliding a device into or out of a rack. Slide rails can pinch your
fingers.
• After a device is inserted into the rack, carefully extend the rail into a locking position, then slide the device into the rack.
• Do not overload the AC supply branch circuit that provides power to the rack. The total rack load should not exceed 80
percent of the branch circuit rating.
• Ensure that proper airflow is provided to devices in the rack.
• Do not step on or stand on any device when servicing other devices in a rack.
• Caution! Slide/Rail (LCD KVM) mounted equipment is not to be used as a shelf or work space.
7
Publicidad
