Tripp-Lite B021-SWHD-K Manual Del Propietário página 17

6. Operation
6.2 OSD Configuration
6.2.1 LCD Buttons
The LCD OSD allows you to set up and configure the LCD display. Four buttons are used to perform the configuration, as
described in the table below:
Button Function
MENU • When you have not entered the LCD OSD Menu function, pressing this button invokes the Menu function
and opens the Main Menu.
• When you have entered the LCD OSD Menu function and have reached a setting choice with the
navigation buttons, pressing this button opens the adjustment screen.
When navigating through the menus, this button moves you right or up. When making an adjustment, it
increases the value.
When navigating through the menus, this button moves you left or down. When making an adjustment, it
decreases the value.
EXIT • When you have not entered the LCD OSD Menu function, pressing this button performs an auto-
adjustment. An auto-adjustment automatically configures all settings for the LCD panel to the OSD's
optimum values.
• When you have entered the LCD OSD Menu function, pressing this button exits the current menu and
returns to the previous menu. Use it to leave an adjustment menu when you are satisfied with the
adjustment made.
• When you are at the Main Menu, pressing this button exits the LCD OSD.
6.2.2 Adjustment Settings
An explanation of the LED OSD adjustment settings is provided in the table below:
Setting Explanation
Brightness Adjusts the background black level of the screen image.
Contrast Adjusts the foreground white level of the screen image.
Phase If pixel jitter or horizontal line noise is visible on the display, your LED may have the wrong phase
setting. Adjust the phase setting to eliminate this problem.
Clock If vertical banding is visible on the display, your LED may have the wrong clock setting. Adjust
the clock setting to eliminate vertical banding.
H-Position Positions the display area on the LED panel horizontally (moves the display area left or right).
V-Position Positions the display area on the LED panel vertically (moves the display area up or down).
Color Temperature Adjusts the color quality of the display. You can adjust the warmth value, color balance, etc. The
Adjust Color selection has a submenu that lets you fine tune the RGB values.
Language Selects the language that the OSD displays its menus in.
OSD Duration Allows you to set the amount of time the OSD displays on the screen. If there is no input for the
amount of time you choose, the OSD display turns off.
Input Source This option is not available, as the B021-SWHD-K only has one input source option.
Reset Resets the adjustments on all menus and submenus to factory default settings.
Note: The language setting does not return to the factory default, but remains at the one that you have set
it to.
17