Esoteric Grandioso S1X Manual Del Usuario página 15

Basic operation
In order to protect the speakers, follow the steps below when turning
on a system connected to this unit and when putting that system
into standby.
Turning the unit on
1
Turn the audio source device on.
2
Turn the preamp power on and minimize its
volume.
3
Press the STANDBY/ON button to turn this unit
on.
After turning the unit on, the power indicator will blink and no
sound will be output for a few seconds. Wait until the power
indicator stops blinking and stays lit before adjusting the volume
and conducting other operations.
Putting the unit into standby
1
If a source device is playing, stop playback.
2
Minimize the preamplifier volume.
3
Put this unit into standby.
4
Turn the preamplifier off.
5
Turn the source device off.
15