Atlas Copco LSF38 S180 E Instrucciones Del Producto página 3

LSF38 S180 E/R
Safety and operating instructions
Safety instructions
Important information for safe use
Our goal is to produce tools that help you work safely and efficiently.
The most important safety device for this and for any tool is YOU.
Your care and good judgement are the best protection against injury.
This power tool must not be modified for product liability and safety reasons. Only qualified and trained op-
erators should install, adjust or use this tool.
All possible hazards cannot be covered here, but we highlight some of the most important. For additional
safety information consult:
■
Other documents and information packed with this tool
■
Your employer, union and/or trade association
■
Appropriate standards as referred to in the Section EC Declaration of Conformity
Further occupational health and safety information can be obtained from the following web sites:
http://www.osha.gov (USA)
http://europe.osha.eu.int (Europe)
Safety signal words
The safety signal words Danger, Warning, Caution, and Notice have the following meanings:
DANGER
WARNING
CAUTION
NOTICE
Personal precautions and qualifications
Installation, storage, maintenance and disposal
Installation, storage, maintenance and disposal of the product may only be undertaken by persons
who:
■
are physically able to handle the bulk, weight and power of the tool
EN
© Atlas Copco Industrial Technique AB - 9836 9632 56
Safety and operating instructions
These instructions concern installation, operation, han-
dling and maintenance of product, inserted/mounted
tool and equipment.
■
It is vital that the operator has read and fully un-
derstood the instructions before using this prod-
uct
■
Keep instructions safe for future reference and
make sure that the operator has complete access
to them
■
Failure to follow these instructions may cause se-
rious hazards
DANGER indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates
a hazardous situation which, if not avoided, could re-
sult in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
3