ATIZA 1000N
ATIZA CONTROL BOARD
Control panel for Atiza 1000N roof motor with 24V power supply. It has built-in the multi rx,
5-pin connector, 6-pin connector and wifi connector.
WARNING!!
-Forbidden to weld on the shaft. The reed must be
held with its support. Risk of breakdown.
FREQUENT QUESTIONS
1- I CAN'T CONNECT THE WIFI
- Check that the signal is good and the 2.4Hz Wi-Fi network
2- THE ENGINE MAKES NOISE
-check that the insulator that covers the chain is in its correct position. (the grooves
must be facing the reed)