Daspi ATIZA 1000N Manual De Usuario página 37

ATIZA 1000N
Install connecting rod (1). To do this, insert the bolt (2) and insert the
retainer (3). Install door accessory (4) by inserting bolts (5) and insert
retainer (3).
1. Pull the emergency release cable once (N). The carriage (1) will be
unlocked. Tighten the screw (8) on the lintel fitting.
2. Fully move the carriage (1) forward (3) using the connecting rod (2).
Release the switch-trigger (4) if necessary.
3. Align the angle of the door accessory (5) with the center of the door
(VM) and mark 5 holes. Drill 5 holes of 5mm diameter.
Cut out the protruding parts of the ceiling brackets (4).