Publicidad
Idiomas disponibles
Idiomas disponibles
DE
wool, metal objects, hot cleaning agents or disinfectants, since they can
cause damage to the appliance.
EN
3.
Clean the kettle from the inside using a soft, damp sponge before rinsing the
FR
kettle out with clear water.
4.
The appliance must be completely dry on the outside before you may use
NL
it again.
IT
5.
Should water have penetrated into the display, dry the housing well and do
ES
not use the appliance again for another 12 hours for reasons of electrical
safety. If in doubt, contact our customer service department.
PL
6.
Store the appliance in a dry place and protected against dust.
DESCALING
1.
To keep the appliance operating efficiently and to prolong its service life,
it should be descaled regularly, depending on the hardness of your water.
2.
Use off-the-shelf descaling products for electric kettles and comply with the
manufacturer's instructions. To descale, fill the kettle to no more than half
full, as the liquid may otherwise boil over and cause severe injuries.
3.
Heat the liquid to no more than 80 °C (do not boil!) and allow it to sit in the
kettle for some time.
4.
Pour the descaling solution out of the kettle.
5.
Next, fill the kettle with fresh water and bring the water to a boil. Pour this
water out as well. Finish by rinsing the kettle with fresh water at least two
times.
26 von 96
Let the appliance cool down before descaling it.
Stand 27.3.2023
Publicidad
