Domo DO7296S Manual De Instrucciones página 69

6. This interface can be connected to smart audio systems to perform several operating functions
using a single button.
ERROR CODES
The appliance can send error messages via the app, this is usually because the vacuum cleaner is blocked.
Remove the object blocking the vacuum cleaner so it can continue to work. If the appliance still does not
work, please contact the DOMO after-sales service. If the voice module is activated, it will also announce
these error messages.
CLEANING AND MAINTENANCE
CLEANING OUT THE CANISTER AND FILTER
Clean the canister and the filter after each use in the following manner:
1. Press the release catch to remove the dust collector. Remove the canister from the vacuum.
2. Open the canister.
3. Empty the canister into the waste bin.
4. Remove the pre-filter.
5. Remove the dust collector lid, the HEPA filter and the filter sponge.
6. Rinse the canister and filter holder under running water. Let them dry before putting them back in
place. Use the dust brush to clean the HEPA filter and the filter sponge.
· If the HEPA filter is dirty, after about 30 days of use, you can also clean it under running water. Let
it dry before putting it back in place.
· The HEPA filter must be replaced after frequent use. The maximum service life of the filter is
approximately 6 months.
7. Place the HEPA filter and filter sponge back in the dust collector lid. Place the pre-filter back in the
dust collector. Ensure that all parts are completely dry before placing back into the appliance.
www.domo-elektro.be
XXXXXXX-robot XXXXX
69
DO7296S