Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE NINJA® PROBE
HOW TO CORRECTLY INSERT THE PROBE
FOOD TYPE:
PLACEMENT
Steaks
• Insert probe
horizontally into the
Pork chops
centre of the thickest
Lamb chops
part of the meat.
Chicken breasts
• Make sure the tip of
Burgers
the probe is inserted
Tenderloins
straight into the centre
Fish fillets
of the meat, not angled
toward the bottom or
top of it.
• Make sure the probe
is close to (but not
touching) the bone and
away from any fat
or gristle.
NOTE: The thickest part
of the fillet may not be
the centre. It is important
that the end of the probe
hits the thickest part
so desired results are
achieved.
Whole chicken
• Insert probe
horizontally into the
thickest part of the
breast, parallel to, but
not touching, the bone.
• Make sure the top
reaches the centre of
the thickest part of the
breast and doesn't go
all the way through the
breast into the cavity.
NOTE: DO NOT use the probe with frozen protein or for cuts of meat thinner than 1.5cm.
IMPORTANT: Reference Quick Start Guide for preset cooking chart when using
SYNC and MATCH with the Probe.
9 ninjakitchen.eu
CORRECT
INCORRECT
COOKING IN YOUR AIR FRYER
REFERENCE QUICK START GUIDE FOR RECIPES AND COOKING CHARTS
COOKING WITH DUALZONE
TECHNOLOGY
DualZone Technology utilises two cooking
zones to increase versatility. The Sync
feature ensures that, regardless of different
cook settings, both zones will finish ready
to serve at the same time.
SYNC (without Probe)
To finish cooking at the same time
when foods have different cook times,
temperatures, or even functions:
1 Place ingredients in the drawers, then
insert drawers in unit.
2 Zone 1 will remain illuminated. Select
the desired cooking function using
the dial. Use the left arrow to set the
temperature, and use the right arrow to
set the time.
3 Select zone 2, then select the desired
cooking function using the dial. Use the
left arrow to set the temperature, and
use the right arrow to set the time.
NOTE: You can select a different
function for zone 2.
4 Press SYNC, then press the dial to begin
cooking in the zone with the longest
time. The other zone will display Hold.
The unit will beep and activate the
second zone when both zones have the
same time remaining.
NOTE: If you decide the food in one of
the zones is done cooking before the
cook time is up, you can STOP A ZONE.
Select that zone, then press START/STOP.
See page 12 for further instructions.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients by tipping them out
or using silicone-tipped tongs/utensils.
DO NOT place drawer on top of unit.
ninjakitchen.eu
10
Publicidad
