Vermeiren Albatros II Manual De Instrucciones página 10

EN
NL
3.1.4 Leg support
CAUTION
 Do not drop the leg support on the patient when adjusting.
The leg supports can be adjusted in depth and 9 different heights.
3.1.5 Thorax support
Risk of injuries
The leg support  can be mounted on the bar of the
patient hoist  with the safety pin .
The leg support is meant to keep the legs of the patient
in the correct position and to support the legs of the
patient while standing up.
1 = Bar for height adjustment
2 = Lever for depth adjustment
To stabilize and support your thorax, the lift is
equipped with thorax pillow and velcro belts to
stabilize.
Height from footplate to
top of leg support
Do not use
Do not use
6
Albatros II
2022-08
Using the patient hoist
Position
690 mm Hole 1
665 mm Hole 2
640 mm Hole 3
Hole 4
Hole 5
495 mm Hole 6
470 mm Hole 7
445 mm Hole 8
420 mm Hole 9