Vermeiren Albatros II Manual De Instrucciones página 18

EN
NL
4.2.2 Assembly
WARNING: Risk of clamping - Take care that no body parts and wires get trapped,
L
crushed or cut during assembly.
1. Remove the safety spindle (locking pin) from the bottom end
of the pole by gently pressing the button at the head of the
spindle. The safety spindle can now be removed easily.
2. Undo the transport lock (wing screw) gently and the pole can
now be raised.
click
3. WARNING: Risk of injury - Make sure that
L
the safety spindle is correctly inserted.
Fix the pole in place by pushing the safety spindle at the end
of the pole in with the pushbutton depressed until its other
end clearly protrudes. Release the pushbutton on the safety
spindle and check that it cannot be pulled out.
14
Installation and adjustment
2.a The standing
(traction screw) clicks audibly into
place once the pole is put in its final
position.
Albatros II
2022-08
position safety