Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

IB50519821
Installation Instructions for Sure-Lites AP2SQLED Series
LED Emergency Light
Instructions d'installation de la lampe d'urgence à DEL
Sure-Lites de la série AP2SQLED
Instrucciones de instalación para la luz de emergencia LED
de la serie AP2SQLED LED de Sure-Lites
IMPORTANT: Read carefully before installing fixture. Failure to comply with these instructions may result in death,
serious bodily injury and property damage. Retain for future reference.
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product
must be performed by a qualified electrician. This product must be installed in accordance with the
applicable installation code by a person familiar with the construction and operation of the product and
hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any
maintenance. Disconnect power at fuse or circuit breaker.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may
arise from the improper, careless, or negligent installation, handling or use of this product.
Note: Specifications and dimensions subject to change without notice.
Read and follow all safety instructions
1.
Do not use outdoors.
2.
Equipment should be mounted in locations and at heights where it will not be subject to tampering by unauthorized
personnel.
3.
Do not mount near gas or electric heaters.
4.
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
5.
Do not use this equipment for anything other than its intended use.
6.
Servicing of this equipment should be performed by qualified personnel.
7.
Disconnect AC power before servicing.
8.
Do not let power supply cords touch hot surfaces.
9.
SAVE THESE INSTRUCTIONS.
Maximum Mounting Height for AP2SQLED: 8 ft
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
WARNING
Sure-Lites

Publicidad

loading

Resumen de contenidos para Cooper Lighting Solutions Sure-Lites AP2SQLED Serie

  • Página 1 Risk of Personal Injury- Due to sharp edges, handle with care. DISCLAIMER OF LIABILITY: Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
  • Página 2 Attach back plate to J-Box and secure with screws. Complete the battery connection. (Fig. B) Align snaps and push housing directly onto the back plate (Fig. C). Apply continuous AC power and press “TEST” button to check light. Fig.C COOPER LIGHTING SOLUTIONS IB50519821 Installation instructions...
  • Página 3 Note: Unused input lead must be properly insulated with AC INPUT CONNECTOR wire nut or other approved (MOUNTING PLATE) method. 277V BLACK 120V WHITE YELLOW(+) BLUE(-) YELLOW(+) BLUE(-) LAMP LAMP BLACK BATTERY TEST READY COOPER LIGHTING SOLUTIONS IB50519821 Installation instructions...
  • Página 4 Risque de blessures – à cause des arêtes tranchantes, manipulez ce produit avec précaution. EXONÉRATION DE RESPONSABILITÉ : Cooper Lighting Solutions n’assume aucune responsabilité pour les dommages ou pertes de quelque nature que ce soit pouvant découler d’une installation, d’une manipulation ou d’une utilisation inappropriée, imprudente ou négligente de ce produit.
  • Página 5 Alignez les pièces à encliquetage et poussez le boîtier Fig.C directement sur la plaque arrière (Fig. C). Appliquez une alimentation CA continue et appuyez sur le bouton « TEST » pour vérifier la lumière. COOPER LIGHTING SOLUTIONS IB50519821 Instructions d’installation...
  • Página 6 écrou en fil de fer ou autre (PLAQUE DE MONTAGE) méthode approuvée. ROUGE 277 V NOIR 120 V BLANC JAUNE (+) BLEU(-) JAUNE (+) BLEU(-) LAMPE LAMPE ROUGE NOIR PILE TEST PRÊT (essai) COOPER LIGHTING SOLUTIONS IB50519821 Instructions d’installation...
  • Página 7 Riesgo de lesiones personales: manejar con cuidado debido a la presencia de bordes afilados. EXENCIÓN DE RESPONSABILIDAD Cooper Lighting Solutions no asume ninguna responsabilidad por daños o pérdidas de ningún tipo que puedan surgir de la instalación, el manejo o el uso incorrectos, descuidados o negligentes de este producto.
  • Página 8 Alinee las lengüetas de colocación a presión y empuje la carcasa directamente sobre la placa posterior Fig. C (Fig. C). Aplique una alimentación de CA continua y pulse el botón “TEST” (PRUEBA) para comprobar la luz. COOPER LIGHTING SOLUTIONS IB50519821 Instrucciones de instalación...
  • Página 9 DE CA tuerca para cables u otro (PLACA DE MONTAJE) método aprobado. ROJO 277 V NEGRO 120 V BLANCO AMARILLO (+) AZUL (-) AMARILLO (+) AZUL (-) LÁMPARA LÁMPARA ROJO NEGRO BATERÍA PRUEBA LISTO COOPER LIGHTING SOLUTIONS IB50519821 Instrucciones de instalación...
  • Página 10 Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com para conocer nuestros términos y condiciones. Cooper Lighting Solutions 1121 Highway 74 South Cooper Lighting Solutions is a registered Peachtree City, GA 30269 trademark. All trademarks are property P: 770-486-4800 of their respective owners.