Boso Bosch+Sohn medicus family 4 Manual Del Usuario página 67

Measurement display
If the symbol appears after the meas-
urement, it is recommended that the
measurement is repeated, holding the
arm completely still. If the
appears again even with the arm held still,
this may be an indication of an irregular
180 210 240
AUTO
AVG.
heartbeat. Please discuss this with your
doctor at your next visit.
The symbol indicates that the arm mo-
ved during measurement. You are advised
3
to take another measurement.
AM
:
Blood pressure is a dynamic parameter and
PM
can be affected by the patient's position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
symbol
SYS.
mmHg.
DIA.
mmHg.
PUL.
/min.
➡ If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself off automatically
after about 1 min. To repeat a measure-
ment, press the start button again briefly.
Allow at least two minutes be-
2
min
tween measurements.
➡ If no further measurement is required,
remove the cuff from the arm.
EN
67